mirror of
https://github.com/balzack/databag.git
synced 2025-02-12 03:29:16 +00:00
29 lines
1.3 KiB
Markdown
29 lines
1.3 KiB
Markdown
# HowTo include Databag in an OpenWrt firmware image
|
|
|
|
These instructions assume can build an OpenWrt firmware for your hardware:
|
|
- guide: [https://openwrt.org/docs/guide-developer/start](https://openwrt.org/docs/guide-developer/toolchain/use-buildsystem)
|
|
- you will likely also want to install nginx from the main feed and configure it as a reverse proxy to the databag service
|
|
|
|
## Databag is currently included as a custom feed
|
|
- clone the custom feed into the OpenWrt repo:
|
|
- git clone https://github.com/balzack/openwrt-databag.git
|
|
- in feeds.conf at the root of the repository add:
|
|
- src-cpy databag ./openwrt-databag/
|
|
- update the package list by running:
|
|
- scripts/feeds update databag
|
|
- install the pacakge by running:
|
|
- scripts/feeds install databag
|
|
- include the pacakge in the firmware by running:
|
|
- make menuconfig
|
|
- enable databag under net/instant messaging/databag
|
|
- build the firmware by running:
|
|
- make -j$(nproc) defconfig download clean world
|
|
- flash and boot the resulting image
|
|
|
|
## Configure the Databag service
|
|
- change the port as desired
|
|
- uci set databag.@databag[0].service_port='<port>'
|
|
- change the storage path to your mounted USB path
|
|
- uci set databag.@databag[0].store_path='<path>'
|
|
- reboot the device
|