64 lines
1.9 KiB
C++
64 lines
1.9 KiB
C++
/***************************************************************************
|
|
This is a library for the BMP280 humidity, temperature & pressure sensor
|
|
|
|
Designed specifically to work with the Adafruit BMEP280 Breakout
|
|
----> http://www.adafruit.com/products/2651
|
|
|
|
These sensors use I2C or SPI to communicate, 2 or 4 pins are required
|
|
to interface.
|
|
|
|
Adafruit invests time and resources providing this open source code,
|
|
please support Adafruit andopen-source hardware by purchasing products
|
|
from Adafruit!
|
|
|
|
Written by Limor Fried & Kevin Townsend for Adafruit Industries.
|
|
BSD license, all text above must be included in any redistribution
|
|
***************************************************************************/
|
|
|
|
#include <Wire.h>
|
|
#include <SPI.h>
|
|
#include <Adafruit_Sensor.h>
|
|
#include <Adafruit_BMP280.h>
|
|
|
|
#define BMP_SCK 13
|
|
#define BMP_MISO 12
|
|
#define BMP_MOSI 11
|
|
#define BMP_CS 10
|
|
|
|
#define ALT_BMP280_ADDRESS (0x76)
|
|
|
|
Adafruit_BMP280 bme; // I2C
|
|
//Adafruit_BMP280 bme(BMP_CS); // hardware SPI
|
|
// Adafruit_BMP280 bme(BMP_CS, BMP_MOSI, BMP_MISO, BMP_SCK);
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
Serial.println(F("BMP280 test"));
|
|
|
|
Serial.println(F("BMP280_ADDRESS"));
|
|
Serial.println(BMP280_ADDRESS);
|
|
Serial.println(F("ALT_BMP280_ADDRESS"));
|
|
Serial.println(ALT_BMP280_ADDRESS);
|
|
if (!bme.begin(ALT_BMP280_ADDRESS)) {
|
|
Serial.println("Could not find a valid BMP280 sensor, check wiring!");
|
|
while (1);
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
Serial.print("Temperature = ");
|
|
Serial.print(bme.readTemperature());
|
|
Serial.println(" *C");
|
|
|
|
Serial.print("Pressure = ");
|
|
Serial.print(bme.readPressure());
|
|
Serial.println(" Pa");
|
|
|
|
Serial.print("Approx altitude = ");
|
|
Serial.print(bme.readAltitude(1006.44)); // this should be adjusted to your local forcase
|
|
Serial.println(" m");
|
|
|
|
Serial.println();
|
|
delay(2000);
|
|
}
|