67 lines
2.1 KiB
C++
67 lines
2.1 KiB
C++
#include <Wire.h>
|
|
#include <Adafruit_BMP085.h>
|
|
|
|
/***************************************************
|
|
This is an example for the BMP085 Barometric Pressure & Temp Sensor
|
|
|
|
Designed specifically to work with the Adafruit BMP085 Breakout
|
|
----> https://www.adafruit.com/products/391
|
|
|
|
These displays use I2C to communicate, 2 pins are required to
|
|
interface
|
|
Adafruit invests time and resources providing this open source code,
|
|
please support Adafruit and open-source hardware by purchasing
|
|
products from Adafruit!
|
|
|
|
Written by Limor Fried/Ladyada for Adafruit Industries.
|
|
BSD license, all text above must be included in any redistribution
|
|
****************************************************/
|
|
|
|
// Connect VCC of the BMP085 sensor to 3.3V (NOT 5.0V!)
|
|
// Connect GND to Ground
|
|
// Connect SCL to i2c clock - on '168/'328 Arduino Uno/Duemilanove/etc thats Analog 5
|
|
// Connect SDA to i2c data - on '168/'328 Arduino Uno/Duemilanove/etc thats Analog 4
|
|
// EOC is not used, it signifies an end of conversion
|
|
// XCLR is a reset pin, also not used here
|
|
|
|
Adafruit_BMP085 bmp;
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
if (!bmp.begin()) {
|
|
Serial.println("Could not find a valid BMP085 sensor, check wiring!");
|
|
while (1) {}
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
Serial.print("Temperature = ");
|
|
Serial.print(bmp.readTemperature());
|
|
Serial.println(" *C");
|
|
|
|
Serial.print("Pressure = ");
|
|
Serial.print(bmp.readPressure());
|
|
Serial.println(" Pa");
|
|
|
|
// Calculate altitude assuming 'standard' barometric
|
|
// pressure of 1013.25 millibar = 101325 Pascal
|
|
Serial.print("Altitude = ");
|
|
Serial.print(bmp.readAltitude());
|
|
Serial.println(" meters");
|
|
|
|
Serial.print("Pressure at sealevel (calculated) = ");
|
|
Serial.print(bmp.readSealevelPressure());
|
|
Serial.println(" Pa");
|
|
|
|
// you can get a more precise measurement of altitude
|
|
// if you know the current sea level pressure which will
|
|
// vary with weather and such. If it is 1015 millibars
|
|
// that is equal to 101500 Pascals.
|
|
Serial.print("Real altitude = ");
|
|
Serial.print(bmp.readAltitude(101500));
|
|
Serial.println(" meters");
|
|
|
|
Serial.println();
|
|
delay(500);
|
|
}
|